Section 3: Configuration
In this section, you may backup, restore and reboot your camera.
Save To Local
Click Save. Configuration to save your current
Hard Drive:
camera configuration as a file on your computer.
Load From
Click Choose. File to locate a pre-existing
Local Hard
configuration on your local hard drive. Restore the
Drive:
pre-defined settings to your camera by clicking
Load.Configuration.
Restore
Click Restore. Factory. Defaults to reset your
to Factory
camera and restore the factory default settings.
Default:
Note: If you reset to factory default settings, you can
use the Camera Installation Wizard to reconfigure
your DCS-6115. Refer to
page
17.
Reboot Device:
Click Reboot.Device to restart your camera.
D-Link DCS-6115 User Manual
System
"Software Installation" on
DCS-6115
55