Section 2: Assembly and Installation
Software Installation
Step.1
Insert the Installation CD-ROM into your computer's CD drive to start
the autorun program. This will launch the Camera Installation Wizard.
The Setup Wizard will guide you through the installation process of
configuring your camera.
Note: If the autorun program does not automatically start on your computer,
go to Windows, click Start > Run. In the Run command box type D:\setup.
exe, where D: represents your CD-ROM drive.
You may download the Setup Wizard for http://support.dlink.com if you do
not have your D-Link CD.
Step.2
You must accept the End User Licence Agreement and follow the on-screen
prompts to install the Camera Installation Wizard.
Step.3
Select your camera from the list, then click Wizard. If you have multiple
cameras, you can identify them using the MAC ID that is printed on the
label located on your camera.
D-Link DCS-6115 User Manual
17