Event Setup - D-Link DCS-5222L User Manual

Section 4 - Configuration
In a typical application, when motion is detected, the DCS-5222L sends images to a FTP server or via e-mail as notifications. As shown in the
illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an event is
triggered, a specified action will be performed. You can configure the network camera to send snapshots or videos to your e-mail address or FTP site.
To start plotting an event, it is suggested to configure server and media columns first so that the network camera will know what action shall be
performed when a trigger is activated.
D-Link DCS-5222L User Manual

Event Setup

42