Set All Call; Set Direct Call - Motorola TLKR T7 Owner's Manual

TLKRT7new.fm Page 15 Friday, May 23, 2008 9:18 AM
All Call Transmission Direct Call Setting
To select this setting, press the or
select a type of Call.

Set All Call

When "All Call Transmission" is selected, press
key or SEL/ key to exit from this setting,
and transmit All Call immediatley.
Then it sounds All Call Tone.
The display shows TX icon and Call icon blinks
while transmitting.
Press the MENU/GRP key to go back to
Note:
Idle status.

Set Direct Call

The display shows ID Number on Channel
segments and ID Name blinks on Sub Code
segments.
Press the key or key to select an ID
Number.
key to
Press key or SEL/ key to transmit Direct
Call command.
Then the user transmits Direct Call command to
only the selected ID.
The display shows TX icon and Call icon while
transmitting.
The unit sounds the selected Call Tone while
transmitting Direct Call command.
Press the MENU/GRP key to go back to
Note:
All/Direct Call setting.
The ID Number for
Direct Call
The ID Name
15