Table of Contents
Advertisement
TLKRT7new.fm Page 6 Friday, May 23, 2008 9:18 AM
Using the Charging Cradle
1. Connect the AC adapter to DC IN 9V and to
a standard electrical outlet.
2. Set the charging cradle on the desk or
tabletop, and place the radio in the charging
cradle with the keypad facing forward.
3. Make sure that the LED illuminates. Charge
the battery pack for 16 hours and remove the
radio from the charging cradle after charge.
Note:
The charge indicator LEDs will remain
on as long as the radios are left in the
charger.
Charging the battery
You can charge the NiMH battery pack itself
using the included battery support bracket.
1. Place the battery support bracket into the
charging cradle.
2. Install the NiMH battery pack applying its
charging contacts to those of charging
cradle. Installing the battery pack incorrectly
will prevent the battery pack from charging.
3. Make sure that the LED illuminates. Charge
the battery pack for 16 hours.
The charge indicator LEDs will remain
Note:
on as long as the battery is left in the
charger.
6
Using the Radio
In order to get the most out of your new radio,
read this reference guide completely before
attempting to operate the unit.
Turning the Radio On and Adjusting the
Volume
1. Turn the rotary knob to clockwise to turn the
radio ON, and increase the volume by turning
the rotary knob. To decrease the volume, turn
the rotary knob to counter clockwise.
2. Turn the rotary knob to the end of
counterclockwise to turn the radio OFF.
Adjusting the Sound (Key Beeps)
Your radio emits a beep each time one of the
keys (except for the PTT and
key) is
pressed.
To switch this sound OFF or ON, press and
hold the
key while turning the radio ON.
Roger Beep
Roger Beep is a BEEP that is sent to notify the
end of transmission (PTT and VOX
transmission). Roger Beep can be heard
through the speaker when Key Beep is on. It is
transmitted even if Key Beep is turned off.
Hide quick links:
Advertisement
Table of Contents
