Call All Available - Motorola DLR1060 User Manual

Non-keypad portable radio
Hide thumbs Also See for DLR1060:
Table of Contents

Advertisement

English
should turn off) and press the PTT button to reply to
the group call.
10 Question: What happens if I am in queue to talk
privately (LED indicator blinking orange), then the
person that was transmitting finished talking and I press
the PTT button to talk but the Top button LED indicator
does not change to solid orange?
Answer: The radio lets you know you are ready for a
private communication by turning the Top button LED
indicator to solid orange and playing the voice prompt
"private" in the beginning. During the private
conversation, it also plays a distinctive Talk Permit
Tone. All these different prompts from the radio need to
happen to ensure there is a private communication
established. If you do not have these prompts, it means
that you do not have private communication established
and you need to try again.
11 Question: How do I know when the radio is no longer in
Private Mode conversation?
Answer: You are no longer in a private conversation if
the Top button LED indicator is not illuminating solid
orange and is either blinking or switched off instead.
Furthermore, the radio plays the voice prompt: "Private
Over".
58
NOTICE:
Remember that the Private Reply and the Direct
Call time out after 10 seconds of inactivity in
which both users are sent back to the group call
mode (Radio plays the voice prompt "Private
Over" and the Top button LED indicator goes
off).
9.4

Call All Available

You can perform group call to all users available on
different channels, and users who are not in an on-going
radio conversation. The Call All Available feature does not
interrupt ongoing communications.
You have the option to program the Call All Available
feature into Top button, or assign to a channel using the
Customer Programming Software (CPS).
The Call All Available feature allows a communication with
all available radio users at once in a temporary "super
channel" group, without having to change through each
channel individually.
When a caller initiate the Call All Available transmission,
the Top button is disabled in all radios involved. The

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents