Set Id Name; Key Lock - Motorola TLKR T7 Owner's Manual

TLKRT7new.fm Page 18 Friday, May 23, 2008 9:18 AM
The ID number requires to distinguish a unit of
the same Group.
The user can set an ID name of up to 4
characters.
The user selects ID number that is displayed on
Channel segments by pressing the
key.
When the registered ID of All Call is selected by
or key, the LCD indicates "USED" at
Sub-code segments, and if non registered ID is
selected, it indicates nothing at Sub-code
segments.
See LCD:
Press the SEL/ key to advance to the setting
ID Name.

Set ID Name

ID name appears on other units' displays when
18
you make an All Call or Direct Call. This is also
the name that appears on other radio displays
when someone wants to make a Direct Call to
you. When no ID Name is set, the unit number
appears.
key or
Press the key or key to select a
character on the blinking sub code segments.
Then, press the SEL/ key to move to the next
character.
The ID Name characters can be selected up to
4 characters.
Finally, press the SEL/
number and ID Name.
The radio exits from ID setting.
Whenever the user presses MENU/GRP
Note:
key, the unit cancels selected ID Number
and entered ID Name, then it exits from
Group Menu.

Key Lock

To lock the keypad:
Press and hold the SEL/
Sub Code segments shows "LOCK" for 2
seconds, then it returns to previous screen.
To unlock the keypad:
key to register the ID
key for 2 seconds.