Room Monitor Feature; Transmitting A Call Tone - Motorola TLKR T7 Owner's Manual

TLKRT7new.fm Page 12 Friday, May 23, 2008 9:18 AM

Room Monitor Feature

You can use one of your TLKR T7 radios as a
room monitor and use the other radio to listen
to and keep a check on the voice in another
room. When you set the room monitor feature,
the monitoring radio will detect voice/noises
(according to the sensitivity level you set) and
transmit back to the listening radio without
pushing the PTT key. The monitoring radio is
not able to receive any transmissions in this
mode.
To turn the Room Monitor ON:
1. Enter the Common Menu and select
"ROOM". Then press SEL/
2. Press the or key to select the desired
room monitor sensitivity level. Use level 1 in
quiet environments, and use level 5 in very
noisy environments.
3. Press the SEL/ key to operate the Room
Monitor.
To turn the Room Monitor OFF:
Press the MENU/GRP key.
12
Note:
- Pressing the PTT key in Room Monitor mode is
invalid and the radio emits PTT Error Tone.
- When the voice/noise in another room continues
more than 60 seconds, the monitoring radio
stops monitoring for 5 second, and resumes.

Transmitting a Call Tone

Your TLKR T7 radio is equipped with 10
selectable call tones that will be transmitted
when the key is pressed in Normal Mode.
To select a call tone:
1. Enter Common Menu and select "TONE".
key.
Then press SEL/
The current call tone number (1-10) blinks.
2. Press the or
number of the desired call tone. Each tone
will be heard through the speaker.
3. Exit the Common Menu.
To transmit the selected call tone, press the
key in Normal Mode. The selected tone will
automatically be transmitted for a fixed length
of time. Call tone will be cancelled when the
PTT key is pressed.
key.
key to choose the