15-8
FRONT AND REAR BRAKES
• Remove the brake pads and spring 3 from the caliper.
• Remove the caliper bracket 4.
• Wrap the caliper with a rag to prevent brake fluid scatter and
piston pop-out.
• Apply low-pressure air into the caliper through the hole to
remove the piston.
Fingers can get caught between piston and caliper
body when removing the piston.
Do not place your fingers on the piston when remov-
ing the piston.
• Remove the piston seal 5 and dust seal 6.
CALIPER INSPECTION
• Inspect the caliper cylinder wall and piston surface for
scratch, corrosion or other damages. If any abnormal condi-
tion is noted, replace the caliper.
• Inspect the rubber parts. If any damages are found, replace it
with a new one.
WARNING