Lancia Ypsilon Owner's Handbook Manual page 38

fig. 28 -
Versions with rear
double seat
For double seats:
❒ lift lever B and C to adjust respec-
tively the left and right back rest
part
L0C0192m fig. 29
From the boot fig. 29
Moving the seat backwards
or forwards
Lift the central tab A and move the
seat backwards or forwards. After
carrying out the operation, fasten the
tab to the velcro on the seat back rest.
Adjusting/reclining the seat back
Operate side tabs B as described in
paragraph "Extending the boot" in
this section.
After adjustment, make sure the tabs
come out of the plastic cover slots.
Only make adjustments
when the car is stationary.
L0C0181m
Back rest in "all-bent" po-
sition shall only be used
with the car stationary.
Once you have released the
lever, check that the seat is
firmly locked in the runners by
trying to move it back and forth.
Failure to lock the seat in place
could result in the seat moving
suddenly and the driver losing
control of the car.
WARNING
WARNING
WARNING
37