Lancia Ypsilon Owner's Handbook Manual page 152

fig. 20
DIPPED BEAM HEADLIGHTS
fig. 20-21
To change the bulb, proceed as fol-
lows:
❒ remove the protective cover releas-
ing the relevant catch;
❒ turn the bulb holder A counter-
clockwise and remove it;
❒ release the two tabs B from the
catches, remove bulb C and replace
it;
L0C0138m fig. 21
❒ refit the bulb holder A into its seat
and turn it clockwise.
❒ once replacement is over, refit the
cover pressing it in the middle un-
til hearing the locking click. Then,
check for proper locking into place.
L0C0139m fig. 22
MAIN BEAM HEADLIGHTS
fig. 22
To change the bulb, proceed as fol-
lows:
❒ remove the protective cover releas-
ing the relevant catch;
❒ release the bulb holder catch A;
❒ disconnect the electric connector B;
❒ remove the bulb C and replace it;
❒ fit the new bulb, making the tabs
of the metallic part coincide with
the grooves on the reflector, recon-
nect the electrical connector B then
hook the bulb holder catch A;
❒ once replacement is over, refit the
cover pressing it in the middle un-
til hearing the locking click. Then,
check for proper locking into place.
L0C0137m
151