Lancia Ypsilon Owner's Handbook Manual page 34

IMPORTANT Lacking information,
Trip computer values are displayed
with "----". When normal operating
condition is reset, calculation of dif-
ferent units will restart regularly. Val-
ues displayed before the failure will
not be reset.
fig. 23
TRIP button fig. 23
Button TRIP, set on the top of the
right steering column stalk, shall be
used (with ignition key at MAR) to
display and to reset the previously de-
scribed values to start a new mission:
– short push to display the different
values
– long push to reset and then start a
new mission.
New mission
New mission starts after:
– "manual" resetting by the user, by
pressing the relevant button;
– "automatic" resetting, when the
"Trip distance" reaches 9999.9 km or
when the "Travel time" reaches 99.59
(99 hours and 59 minutes);
L0C0027m
– after disconnecting/reconnecting the
battery.
IMPORTANT The reset operation in
the presence of the screens concern-
ing the "General Trip" makes it pos-
sible to reset also the "Trip B". The
reset operation in the presence of the
screens concerning only the "Trip B"
makes it possible to reset only the in-
formation associated with this func-
tion.
33