Call Forward - Mitel OpenPhone 27 User Manual

C
ALL FORWARD
Call Forward lets you redirect incoming calls to an alternate number. Always redirects all
incoming calls regardless of the state of your phone. B-Int redirects internal calls when your
phone is busy, and B-Ext redirects external calls when your phone is busy. NA-Int redirects
internal calls after several rings if you don't answer, and NA-Ext redirects external calls after
several rings if you don't answer. It is common practice to set call forwarding to a voice mail
system that is internal to the 3300 system (ask your system administrator for details regarding the
voice mail system).
There is no visual indication provided on the handset to show that Call forwarding is enabled;
however, there is audible indication. If Call Forwarding is enabled, you will hear interrupted dial
tone whenever you go off-hook (by pressing the
To program Call Forward:
1. Long press the
2. Press No until "Call Forwarding?" appears.
3. Press Yes.
4. Press Next until the desired type of Call Forward appears (see above).
5. Press Review.
6. If a number is already programmed, press Change.
7. Press Program.
8. Do one of the following:
•
Dial the destination number.
•
For Call Forward I Am Here, dial your extension number.
9. Press Save.
10. Long press the
To turn Call Forward on and off (once it has been programmed):
1. Long press the
2. Press No until "Call Forwarding?" appears.
3. Press Yes.
4. Press Next until the desired type of Call Forward appears.
5. Press Review.
6. Press Change.
•
To turn Call Forward on, press TurnOn. If Call Forwarding is enabled, you will hear
interrupted dial tone whenever you go off-hook (by pressing the
•
To turn Call Forward off, press TurnOff.
7. Long press the
key.
key.
key.
key.
O P 27 H
PEN HONE
key).
U G
ANDSET SER UIDE
key).
Page 27