Table of Contents
Advertisement
Once you have adjusted and confirmed the setting or parameter that you
want to change, use the BACK button to exit the menu and get back to the
normal main screen display. On the whole it's pretty obvious so try it.
Menu Structure and operation
To enter the menu, press the MENU button in the Control section of the
front panel.
Setting up adjustable parameters
This list may not be exhaustive as JoeCo is constantly improving its products
and may have added features to the software since this document was
authored. However, this will give you a good idea of the basics and you can
always get the most up to date information from the website.
The currently selected Menu item is
highlighted in Yellow.
When a Menu item to be adjusted is
selected, the display changes to yellow text
on a red background. You can then use the
control wheel to change the setting before
confirming with the MENU button or rejecting your changes with the BACK
button. Some real time functions cannot be rejected with the BACK button.
Unavailable items are "greyed out" in light red text.
Playback Lockout
Playback Lockout has two settings, on & off, indicated by a tick () beside
the option in the MENU and the LED in the Meter area. In the setup menu
you can decide to control Playback Lockout manually or set it to be asserted
automatically whenever you enter record as a safety measure.
Track Arm...
Arm All: Arms (enables recording on) all tracks.
Disarm All: Disarms (disables recording on) all tracks.
BLACKBOX BBR64MADI & BBR DANTE RECORDER - User Manual v2.2
Page | 21
Advertisement
Table of Contents
