Black Box BBR64-MADI User Manual page 27

Display Song TC on Play
This setting changes the main on-screen time display. When ticked, the main
display shows the incoming timecode or the timecode embedded in the
playback file rather than the length of the recording or where the BBR is in
the Playback of this file. It is most useful when working with Timecode
Adjusting the real-time clock
The real-time clock is used to create folders on the drive with a logical name
so that you can find your recording again later. It's also used to timestamp
your recordings when no other reference (such as Linear Time Code) is
available, so it's a good idea to make sure that the clock is set correctly.
Select Date/Time from the Setup menu. Select which field you want to
adjust. Press MENU to edit the field with the data wheel and then Menu
again to confirm and the BBR moves onto the next field automatically. Press
BACK when finished.
Reset
Resets the BlackBox back to its factory state – useful if you've forgotten
what parameters you've changed.
Monitor...
Monitor AGC
This sets up the automatic gain control on the headphone monitor outputs,
helping you to hear what's going onto disk in a noisy live environment.
Solo in: Affects whether the PFL bus for metering and headphones is
working in mono (1 channel) or stereo (2 channels).
BACK: This affects how you use the PFL bus. There are two settings: in
toggles level/select the operation of the data wheel can be toggled between
selecting the PFL channel and the headphone volume by pressing the BACK
button when on the main screen; in Hold for channel select you have to
hold the BACK button down whilst using the data wheel to select different
channels onto the PFL bus. The latter mode is mainly for legacy users of
BlackBox Recorders.
BLACKBOX BBR64MADI & BBR DANTE RECORDER - User Manual v2.2 Page | 27