Black Box BBR64-MADI User Manual page 22

Table of Contents

Arm ticked: Arms the tracks (listed below) that have a tick "" (sometimes

called a "check mark") beside them.

1...64: the tracks which can be ticked or unticked using the MENU button

and then Armed using the Arm Ticked menu item above. Track names (if

used) are displayed here also. (See Renaming Tracks on page 17)

Clear all track names: this clears all the displayed track names – subsequent

recordings will not use track names (unless you rename them)

Load from current song: this loads the track names from the current song

into the track display. Subsequent recordings will use these track names.

Update track on song edit: when ticked the track names will be appended to

any song when you edit its name.

Song Select...

This loads the Song Select Menu allowing you to select Songs for playback.

The options are:

Recent Songs...

Provides a list of the most recently played Songs – useful if you're on tour

and want to use the same songs in each venue for sound checking

Select Song Folder...

Allows you to navigate to a particular folder. This automatically loads...

Select Song...

Allows you to choose a Song from within the selected Folder.

Input/Output...

This menu item allows you to set up the

audio input and output and determine

how the BlackBox should clock to the

incoming data stream. MADI In: is

selectable between Electrical (Coax BNC)

and Optical (SC connectors). The

Reference Clock: (see below) will normally

either be provided via a wordclock BNC signal or you may need to extract

Page | 22

BLACKBOX BBR64MADI & BBRDANTE RECORDER - User Manual v2.2

Table of Contents

Bbrdante