Table of Contents
Advertisement
To the right of the JoeCo logo is the control wheel which has a number of
functions explained later in this manual.
Then we have the main Transport controls [PLAY, STOP, RECORD] with the
four other control buttons above [L-R: BACK, MARK, LOOP, MENU].
Finally, at the right hand side of the front panel is the colour LCD display.
Rear Panel
The rear panels of the BBR64-MADI and BBR-DANTE BlackBox Recorders are
as follows: The areas indicated in the diagram below are explained in more
detail later in this manual.
BBR64-MADI
MADI i/o
Balanced
Timecode
Analogue
and Control
inputs
Audio i/o on the BBR64-MADI utilises either optical or coaxial (BNC)
connections and both variants are provided for, selectable in software (see
above).
Audio Clocks may be extracted from the incoming MADI data stream, from
the separate word clock input or from the BBR link RCA input (ext clk in).
The rightmost of the lower 3 D-type cut outs provides for an additional 8
channels of balanced analogue input .The cable loom should conform to the
TASCAM standard for analogue i/o (pin out is available in the visitor section
of the LogIn area of the JoeCo website
www.joeco.co.uk
).
A stereo TRS ¼" headphone socket provides the output of the Pre Fade
Listen bus.
BLACKBOX BBR64MADI & BBR DANTE RECORDER - User Manual v2.2
Page | 7
Advertisement
Table of Contents
