Black Box BBR64-MADI User Manual page 25

controller. The BBR can also respond to Sony 9-pin Machine Control (also
known as SONY PII) protocol commands for transport controls and track
arming/disarming. The ring of the LTC/F.sw
TRS jack socket can accept a momentary
footswitch which will emulate pressing the
record button (starting a new recording or
marking a new song). If you need to use
this facility with LTC timecode you'll need
to make up a special cable but if you're just
using a standard footswitch push the jack in half way.
Link Mode and Link Preroll
Used for linking multiple BlackBox Recorders together: see section later in
this manual on page 32.
TC Format
Set the timecode frame rate. The BlackBox will then flash the time code
display (bottom right of main screen) if the incoming time code is at a
different rate to that which you have chosen.
TC Trim
This is a special feature that allows post production users to trim the
timecode for more accurate time-stamping. It will not be of much use in a
Live situation.
TC Auto
Set the internal timecode format to match the incoming timecode. This can
cause problems later in post production if your source of timecode is
intermittent and happens to start at the same time as a recording. Using this
mode is deprecated
MIDI SETUP
Please see the separate document available in the log in area on the JoeCo
website
BLACKBOX BBR64MADI & BBR DANTE RECORDER - User Manual v2.2 Page | 25