Jog Steer (Tiller Pilots Only); Shortcut Key - Raymarine p70 User Reference

5.8 Jog steer (tiller pilots only)

If you have a tiller drive installed on a SeaTalk network, your vessel
you can use the pilot controller to operate the ram in Jog steer mode.
Jog steer mode enables you to use the pilot controllers –1, +1, –10,
+10 buttons, or the ROTARY controller to move the ram in and out
to aid connecting and disconnecting the ram.
Note: Jog Steer can only be used whilst your vessel is in
STANDBY.
Using jog steer (tiller drives only)
1. Ensure your vessel pilot is in STANDBY mode.
2. Use the –1 and –10 buttons, or turn the rotary controller
anticlockwise to retract the ram.
3. Use the +1 and +10 buttons, or turn the rotary controller
clockwise to extend the ram.
Pilot modes

5.9 Shortcut key

When in pilot view you can assign pilot modes to the LEFT SOFT
button as a shortcut depending on which vessel type has been set
up.
The following pilot modes can be assigned as shortcuts:
• Track (default) — All vessels
• Pattern — Power and fishing vessels
• Power steer — All vessels (Rotary only)
• Wind vane — Sailing vessels
Assigning the shortcut key
In order to assign a pilot mode as a shortcut mapped to the LEFT
SOFT button follow the steps below:
1. Navigate to the Shortcut menu: Menu > Mode > Shortcut.
2. Select the required pilot mode.
3. Press SAVE.
41