Using The Mhl Function - Toshiba 40TL20 Series Owner's Manual

4
Press v to stop playback.
Notes:
• Depending on the fi le size, it may take some
time for playback to begin.
• During playback, you can adjust the SOUND
menu functions from the Quick Menu.
During playback:
• Press to pause.
• To resume normal playback, press c (play).
PAUSE may not be available depending on the
contents or DMS.
• To play in fast reverse or fast forward
directions, press CC or cc during playback.
Each time you press CC or cc, the playback
speed will change.
To set the repeat mode:
1
Press QUICK to open the Quick Menu.
2
Press or to select Repeat.
3
Press or to select Off, All or 1.
Mode Description
Off Files in the same folder are played back
once.
All Files in the same folder are repeatedly
played back.
1 The same fi le is repeatedly played back.
4
Press BACK.
Note:
When in the DMS and Multi View modes, this
feature cannot be used.
To select a music fi le from Play List
While playing a music fi le, you can select a
different music fi le from the Play List.
1
Press QUICK to open the Quick Menu.
2
Press or to select Play List and press
Q. The Music List will appear.
3
Press or to select a fi le name and press
Q.
To display the fi le status information
1
Press during playback. The
information will be displayed on the bottom
of the screen.
2
Press again to remove the information.
Note:
The information may not be correctly displayed
depending on the contents or DMS.
Connecting your TV
Closing the Music Player:
1
Press EXIT.
File Compatibility
See page 45.

Using the MHL Function

You can use the following functions by
connecting the HDMI 4 port on the TV and the
USB port on a mobile phone, etc. with the MHL
cable.
• MHL: Mobile High-defi nition Link
• Charging the mobile phone from the TV.
• Remote operation from the TV to the mobile
phone.
• Video/Audio output from the mobile phone.
Notes:
• These functions may not be available
depending on the connected device.
• If there is no battery in the connected device,
charging will not start (TV standby only).
Connecting an MHL-compatible Device
Connect the device to the HDMI 4 port on the
TV using an MHL cable (not supplied).
• When you connect an MHL-compatible device
to the HDMI 4 port on the TV with the MHL
cable, charging starts automatically.
Note:
Do not connect an MHL-compatible device to
any port other than the HDMI 4 port.
Selecting the MHL Setup
Selecting whether or not input automatically
switches to the HDMI 4 port when an MHL-
compatible device is connected.
1
From the PREFERENCES menu, press
to select MHL Setup.
2
Press Q to display the TV Auto Input
Switch menu and press
or Off.
Notes:
• Do not turn off the AC power source while the
TV is turned on and a device is connected.
HDMI 4
or to select On
or
41