Selecting The Pc/Hdmi 3 Audio Mode - Toshiba 40TL20 Series Owner's Manual

• This TV is able to connect with HDMI devices.
But it is possible that some HDMI devices may
not operate properly with this TV.
Connecting an HDMI or a DVI device
The HDMI input on your TV receives digital
audio and uncompressed digital video from an
HDMI device and uncompressed digital video
from a DVI device.
This input is designed to accept HDCP
programme material in digital from CEA-861-D
compliant consumer electronic devices (such
as a set top box and DVD player with HDMI and
DVI output).
The HDMI input is designed for best
performance with 1080i (50 Hz/60 Hz) and
1080p (24/50/60 Hz) high-defi nition video
signals, but will also accept and display 480i,
480p, 576i, 576p, and 720p (50Hz/60 Hz) and
VGA (VESA 640 × 480 @ 60/72/75 Hz) signals.
• HDMI: High-Defi nition Multimedia Interface
• DVI: Digital Video Interface
• HDCP: High-bandwidth Digital Content
Protection
• CEA-861-D compliance covers the
transmission of uncompressed digital video
with high-bandwidth digital content protection,
which is being standardized for reception of
high-defi nition video signals. Because this is
an evolving technology, it is possible that some
devices may not operate properly with the TV.
• Acceptable PC signal format:
S-VGA: VESA 800 5 600 @ 56/60/72/75 Hz
XGA: VESA 1024 5 768 @ 60/70/75 Hz
W-XGA: VESA 1280 5 768 @ 60/75 Hz
W-XGA: VESA 1360 5 768 @ 60 Hz
S-XGA: VESA 1280 5 1024 @ 60/75 Hz
However, these signal formats are converted to
match the number of pixels of the LCD panel.
Therefore, the TV may not display small text
properly.
If you connect this unit to your PC, the
compressed image is displayed in S-XGA mode,
therefore the picture quality may deteriorate and
characters may not be read.
• L-PCM: Linear-Pulse Code Modulation.
• Supported Audio format: L-PCM, Dolby Digital,
sample rate 32/44.1/48 kHz
Connecting an HDMI device
One HDMI cable (type A connector)
For proper operation, it is recommended that
you use a short HDMI cable.
HDMI cable transfers both video and audio.
32
Connecting your TV
TV side view
HDMI device
Connecting a DVI device
One HDMI (type A connector)-to-DVI adapter
cable and audio cables
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-
DVI adapter cable should not exceed 3m. The
recommended length is 2m.
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only
video. Separate analogue audio cables are
required.
TV back view
DVI device

Selecting the PC/HDMI 3 Audio mode

You can select PC audio or HDMI audio when
using this function.
1
From the PREFERENCES menu and press
or
2
Press Q to display the AV Connection
menu.
TV back view
VIDE O AUDIO
L R
IN
HD MI OU T
OUT
DVI
VIDEO AUDIO
OUT
L R
IN
OUT
to select AV Connection.