Watching Tv Programmes; Programming Channels Into The Tv's Channel Memory - Toshiba 40TL20 Series Owner's Manual

Watching TV programmes

Selecting the menu language
Choose from 9 different languages (English,
Chinese (CS), Malay, Thai, Vietnamese, Russian,
Arabic, Persian or French) for the on-screen
display.
1
Press MENU, then press
SETUP menu.
SETUP
Menu Language
Auto Tuning
Manual Tuning
Quick Setup
Location
Software Licences
System Information
Reset TV
2
Press or to select Menu Language.
3
Press or to select the desired language.
Changing the position
1
Enter the desired position number using the
Number buttons on the remote control.
For positions below 10, use 0 and the
required number e.g., for position 1.
1
ABCD
2
You can also change the position by using
PU or Pu.
The position will be displayed on the screen
with the Mono/Stereo/Dual audio status.
Note:
Changing positions between different format
channels takes several seconds.
Switching between two positions
You can switch two positions without entering
actual position number each time.
1
Select the fi rst position you want to view.
2
Select the second position with the Number
buttons (0-9).
3
Press . The previous channel will be
displayed.
12
Introduction / Getting started
or to display
Each time you press
back and forth between the two positions.
Displaying the on-screen information
English
Germany
Antenna 1
Home
2
Programming channels into the TV's
channel memory
• First, use the Auto Tuning function to preset all
• Use the Manual Tuning operation if desired
Auto Tuning
1
2
EFGH
3
IJKL
Press to display the following on-
screen information.
4
ABCD
The information will disappear in 5 seconds.
• Position or external input mode selected
• Position skip on/off information
• Label (if set)
• Mono/Stereo/Dual audio status
To erase the display instantly, press
again.
the active channels in your area automatically.
Then, arrange the preset channels with the
Manual Tuning function so that you can tune
into only desired channels.
channels cannot be preset with the Auto
Tuning or if you would like to preset channels
to specifi c position numbers one by one.
From the SETUP menu, press
select Auto Tuning.
SETUP
Menu Language
Auto Tuning
Manual Tuning
Quick Setup
Location
Software Licences
System Information
Reset TV
Dual
, the TV will switch
or to
English
Germany
Antenna
Home