Turning The Tv On; Tuning The Tv For The Fi Rst Time - Toshiba 40TL20 Series Owner's Manual

Turning the TV on

Switching on the TV
Connect the power cord to a wall outlet, the !
power indicator lights in red (standby mode).
1
on the remote control or ! on the
Press
TV left side panel, the ! power indicator
lights in green.
Note:
If you watch black and white programmes when
the Colour System mode is set to Auto, colour
noise may appear on the screen. In this case
select the appropriate Colour System (For the
system of each country or region, refer to pages
13, 49).
Switching off the TV
1
Press on the remote control or the Touch
Keys on the TV left side panel to switch to
the standby mode.
Notes:
• When the TV will not be used for a long period
of time, such as during vacation or travel,
remove the power plug from the wall outlet.
• If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the
TV automatically when power is applied again.
If power is going to be off for a long time and
you are going to be away from your TV, unplug
the power cord to prevent the TV from turning
on in your absence.
Tuning the TV for the fi rst time
Before switching on the TV, put your decoder
and media recorder to standby, if they are
connected, and ensure that the aerial is
connected. To setup the TV, use the buttons on
the remote control as detailed on page 9.
1
Press . The Menu Language screen will
appear. This screen will appear the fi rst time
that the TV is switched on.
Menu Language
2
Press , , or
Language (English, Chinese (CS), Malay,
Thai, Vietnamese, Russian, Arabic, Persian or
French).
10
Introduction / Getting started
to select the Menu
3
Press Q, to display the Location menu (-
page 14).
Press or to select Store or Home. For
normal home use, select Home.
Location
To use the TV for displaying in a store showroom,
please select [Store]. [Home] mode is
recommended for normal use.
Home
Store mode:
• A confi rmation menu will appear.
• AutoView menu is not available.
4
Press Q to display the AutoView menu
(- page 16).
Press or to select Yes or No.
AutoView
AutoView mode automatically adjusts picture settings to suit ambient
light conditions. Do you wish to enable AutoView mode?
5
Press Q to display the Auto Signal Booster
menu (- pages 13), and then press
to select Yes or No.
Auto Signal Booster
Signal Booster boosts weak analogue broadcast signals.
If you select [Yes], the TV will automatically set this feature
to [On] or [Off] according to signal strength.
Do you wish to enable automatic control?
Yes
Yes mode :
This function performs automatic distinction
of On or Off.
6
Press Q to display the Auto Tuning startup
screen. Press Q to start the automatic search.
Auto Tuning
Progress
1%
7
When the automatic search is completed, the
TV will automatically return to 1 position and
appear the position list on the screen.
Note:
The Quick Setup menu can also be display at
any time from the SETUP menu.
No
or
Found