Menu (- Pages 32, 33) - Toshiba 40TL20 Series Owner's Manual

2
Press Q to display the Auto Signal Booster
menu (- page 10), press
Yes or No.
3
Press Q to display the Auto Tuning menu.
Auto Tuning
Previous settings will be lost! Press EXIT for no change. Press
OK key to start Auto tune.
Start Scan
4
Press Q to start the automatic search.
The search will begin for all available stations.
Auto Tuning
Progress
1%
5
When the automatic search is completed, the
TV will automatically return to 1 position.
Manual Tuning
1
From the SETUP menu, press
select Manual Tuning.
2
Press Q to display the Manual Tuning
menu.
Press or to select the programme
position you want to arrange.
Manual Tuning
Pos. Channel
1 C-02
2 C-04
3 C-05
4 C-07
5 C-09
6 C-12
7 S-17
8 S-19
3
Press Q to display the breakdown menu.
Press or to select an item, then press
or to select the item as shown below.
Manual Tuning
Position
1 B/G A C 2
A C E F G
B D
A. Position selection
B. System (Sound) (- page 49)
C. Colour System (- page 49)
A : Automatic (factory set), P : PAL,
S : SECAM, N4 : NTSC 4.43 (MHz),
N3 : NTSC 3.58 (MHz)
Introduction / Getting started
or to select
Found
or to
Label
0 On
J
H I
If the colour of a certain channel is
abnormal, the automatic colour system
selection (A) may have malfunctioned,
or sound system selection is wrong. In
such a case, select another colour and/or
sound system (- page 49).
D. Position skip selection
Press or to turn the position skip
option on "8" or off "(".
The position will then be skipped when
you select channels with PU or Pu.
The "8" mark will appear when you use
the Number button on the remote control.
E. Signal Class selection (- page 47)
Press or to select C or S.
C: 1 ch - 12 ch, 21 ch - 70 ch
S: 1 ch - 41 ch, 51 ch - 55 ch
F. Channel selection
Press or until your desired channel is
displayed (- page 47).
G Search operation
Press to search up the band or
search down the band.
Press or repeatedly until your
desired signal is displayed.
NEVER PRESS ANY OTHER BUTTONS
WHILE THE SET IS TUNING.
H Manual Fine Tuning
Press or until better picture and
sound are obtained.
I. Signal Booster
If the receiving signal is weak/strong and
the picture is noisy, the picture may be
improved when using this function.
Press the or to turn the Signal
Booster On or Off.
J. Label
Station labels appear under the
programme position display each time you
turn on the TV, select a channel, or press
.
To change or create station labels:
1) Press or repeatedly to select a
character for the fi rst space, then press
or .
2) Repeat step 1) to enter the rest of the
characters. If you would like a blank
space in the label name, you must
choose a blank space from the list of
characters.
Press Q to store your settings.
to
*(blank space)
13