Toshiba 40TL20 Series Owner's Manual page 19

Selecting the stereo programmes
1
When a stereo programme is received, d
Stereo appears.
10
ABCD
2
Press g to select the stereo/monaural
mode. d Stereo and e Mono appear
cyclically on the screen.
Stereo
Selecting the bilingual programmes
1
When a bilingual programme is received,
j Dual appears.
2
Press g to select the sound to be
heard. The sound differs according to the
transmission system: NICAM or German
stereo/bilingual broadcast.
Sound to be heard
Display
NICAM
Sub I sound
j Dual 1
Sub II sound
J Dual 2
e Mono Main sound
Note:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence
arises in the low sound volume level, setting the
e Mono 2 mode will mitigate the problem.
1
When a monaural programme is received, e
Mono appears.
2
Press g to select a monaural mode that
is easy to hear. e Mono 1 and e Mono 2
appear cyclically to the screen.
Note:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching
on the e Mono 2 mode.
Adjusting the sound Balance
1
From the SOUND menu, press
select the Balance.
Using the TV's features
2
Using the Advanced Sound Settings
Bass and Treble help to adjust the basic sound
Stereo
quality.
Dynamic Bass Boost helps to emphasize the
bass sound. Please use this function in your
favorite.
Voice Enhancement helps to emphasize
dialogue. It will be easier to hear voices over
other background audio.
1
2
German stereo/
Using the Stable Sound
bilingual broadcast
The Stable sound function limits the highest
Main sound
volume level to prevent extreme changes in
Sub sound
volume when the signal source changes (for
example, to prevent the sudden increase
—
in volume that often happens when a TV
programme switches to a commercial).
1
2
Dynamic Range Control
This feature allows control of compression for
digital audio signal excluding those with MPEG-
1 and MPEG-2 audio.
1
2
Setting the Digital Audio Output
1
or to
Press or to adjust the settings as
desired.
From the SOUND menu, press
select Advanced Sound Settings and press
Q.
Advanced Sound Settings
Bass 0
0
Treble
Voice Enhancement
Dynamic Bass Boost
Press or to select Bass or Treble you
want to adjust and press
the settings as desired.
Voice Enhancement : On or Off.
Dynamic Bass Boost : Low, High or Off.
From the SOUND menu, press
select Stable Sound.
Press or to select On or Off.
From the SOUND menu, press
select Dynamic Range Control.
Press or to select On or Off.
From the PREFERENCES menu, press
to select AV Connection and press Q.
or to
On
High
or to adjust
or to
or to
or
19