Toshiba 40TL20 Series Owner's Manual page 21

Activating the 4:3 Stretch
When 4:3 stretch is activated, this function will
switch 4:3 format programmes into a full screen
picture.
1
From the Display Settings menu, press
to select 4:3 Stretch.
2
Press or to select On or Off.
Note:
This feature is not available when Auto Format
is set to Off.
Panel Lock
Panel Lock disables the buttons on the TV. All
buttons on the remote control can still be used.
1
From the PREFERENCES menu, press
to select Panel Lock.
2
Press or to select On or Off.
Note:
When Panel Lock is On, a reminder will appear
when the keys on the TV are touched. If the
standby key is touched, the TV will switch off
and can only be brought out of standby by using
the remote control.
Setting the Automatic Power Down
The TV will automatically turn itself off (standby)
after approximately 4 hours, if you do not
operate the control buttons on the remote
control or on the TV control panel.
1
From the PREFERENCES menu, press
until Energy Saving Settings is selected,
and then press Q.
2
Press or to select Automatic Power
Down, press or
then press EXIT.
Notes:
1 minute before switching to standby, a warning
message will appear.
Setting No Signal Power Down
The TV will automatically turn itself off after
15 minutes when no signal is detected. You
can change the setting to Off for the following
purposes:
• Low signal strength of analog channel (no
signal detection).
• Only Audio L/R is connected to an external
input in order to listen to music through the TV
speakers.
1
From the Energy Saving Settings menu,
press Q.
Using the TV's features
or
or
or
to select On or Off, and
2
Press or to select No Signal Power
Down and press Q.
3
Press or to select the item you want
to change and press
Off.
Notes:
• Default setting is all On.
• A warning message will appear 1 minute
before turning off.
Viewing the Software Licences
The licences for the software used in this TV are
available for viewing on screen.
1
From the SETUP menu, press
select Software Licences.
2
Press Q.
A screen will appear displaying all of the
licencing information required for the TV's
software.
Confi rming software version
1
From the SETUP menu, press
select System Information.
2
Press Q to display the software version.
System Information
TOSHIBA
2011
Xxx XX 2011 - XX.X.XX.X
MBOOT Version : XXXXXXXX
MFC Version : XXXXXX
Note:
The software version displayed is just for the
illustration.
Resetting the TV
Reset TV will reset all TV settings, including
stored channels, to their original factory values.
1
From the SETUP menu, press
select Reset TV.
SETUP
Menu Language
Auto Tuning
Manual Tuning
Quick Setup
Location
Software Licences
System Information
Reset TV
2
Press Q to select.
or to select On or
or to
or to
or to
English
Home
21