Selecting The Pc/Hdmi 2 Audio Mode; Connecting A Computer - Toshiba 58L9300 Series Owner's Manual

Connecting a DVI device
One HDMI (type A connector)-to-DVI adapter cable
and audio cables.
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-
DVI adapter cable should not exceed 3 m. The
recommended length is 2 m.
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only video.
Separate analogue audio cables are required.
TV back view
DVI device
VIDEO AUDIO
L R
Connecting an HDMI audio system
One HDMI cable (type A connector)
AV amplifier corresponding to ARC
42
TV side view
DVI
OUT
IN
OUT
TV side view
Connecting your TV
HDMI's ARC (Audio Return Channel) feature
This feature enables the audio signal of the TV to be
sent to the AV amplifi er via the HDMI cable.
It will not be necessary to connect a cable from the
audio output of the TV to the audio input of the AV
amplifi er to reproduce the audio received from the
tuner of the TV through the AV amplifi er.

Selecting the PC/HDMI 2 Audio mode

You can select PC audio or HDMI audio when using
this function.
1
Press MENU and  /  to select Options icon.
2
Press  and  /  to select AV Connection .
3
Press  and  /  to select PC/HDMI 2 Audio.
< AV Connection
Input Labelling
Digital Audio Output
PC/HDMI 2 Audio
4
Press  and  /  to select PC or HDMI2.
NOTE:
To apply the setting, switch the input to PC or HDMI 2.

Connecting a computer

To connect a PC to the RGB/PC terminal on the TV:
An analogue RGB (15 pin) computer cable can be
connected.
Computer
Connect a PC cable from the computer to the
o RGB/PC terminal on the back of the TV.
TV back view
Audio cable
for PC-to-TV
connection
Mini D-sub
Conversion
RGB PC cable
adapter
(if necessary)
15 pin