Selecting The Pc/Hdmi 3 Audio Mode; Setting The Hdmi 3 Audio Mode - Toshiba 42XL700E Owner's Manual

Connecting a DVI device
One HDMI (type A connector)-to-DVI adapter
cable and audio cables
Back of TV
1 ( ARC ) 2
DVI device
VIDEO AUDIO
L R
HDMI (type A connector)-to-DVI adapter cable
For proper operation, the length of an HDMI-to-
DVI adapter cable should not exceed 3m� The
recommended length is 2m�
Standard analogue audio cables
An HDMI-to-DVI adapter cable transfers only
video� Separate analogue audio cables are
required�

Selecting the PC/HDMI 3 Audio mode

You can select PC audio or HDMI audio when
using this function�
1
From the PREFERENCES menu, press s or
r until AV Connection is selected�
PREFERENCES
Teletext
Teletext Language
Panel Lock
Display Settings
AV Connection
Energy Saving Settings
Blue Screen
HDMI Information Display
2
to display the AV Connection
Press
menu�
Connecting your TV
3
Back of TV
PC/HDMI 3
(AUDIO)
DVI
OUT
IN
OUT
Auto
4
Off
On
Off
AV Connection
Input Labeling
PC/HDMI 3 Audio
HDMI 3 Audio
HDMI Settings
Woofer
Digital Audio Output
3
Press s or r to select PC/HDMI 3 Audio,
then press v or w to select PC or HDMI 3�

Setting the HDMI 3 Audio mode

You can select sound of an HDMI or DVI device
connected to the HDMI input terminals from
three modes:
Auto, Digital or Analogue�
Note:
This function is available only when the
PC/HDMI 3 audio mode is set to HDMI 3.
1
From the AV Connection menu, press s or
r to select HDMI 3 Audio�
2
Press v or w to select Auto, Digital or
Analogue�
Selecting the HDMI Settings
The HDMI Settings menu consists of the
following 3 items: Enable Content Type,
INSTAPORT™ and RGB Range� Some early
HDMI equipment may not work properly with
your HDMI TV� If you experience trouble, unplug
your HDMI cable first and then try setting the first
two options to Off� This should allow your early
HDMI source to operate properly with your TV�
1
From the AV Connection menu press s or
r to select HDMI Settings, and then
press �
HDMI Settings
Enable Content Type
INSTAPORT
TM
RGB Range
2
Press s or r to select each item, and then
press v or w to select the desired setting�
Enable Content Type mode
This feature accepts the content type data from
the connected HDMI device�
INSTAPORT™ mode
This feature reduces the lag time when switching
HDMI sources�
PC
Digital
Internal
PCM
On
On
Auto
37