Setting The Advanced Positioning Sensor - Omron HEM-670IT Instrustion Manual

SETTING THE ADVANCED POSITIONING SENSOR

The Advanced Positioning Sensor (APS
correct position level with the user's heart before the monitor starts to take
the measurement. When the APS Sensor is set to ON, the SIGNAL can be
set to ON or OFF. When the SIGNAL is set to ON, the monitor beeps
when correctly positioned.
1. TO CHANGE THE SETTING
Press the START/STOP button
to turn the power off, then press
the SET button.
Continue to press the SET button
until the Position Sensor Screen is displayed
The Position Sensor Screen is displayed with the current setting.
The Position Sensor and the SIGNAL are set to ON at the time of
purchase.
2. SELECTING ON OR OFF
Press the ( ) button to change the setting
to OFF.
Press the ( ) button to change the setting
to ON.
To set the SIGNAL press ON or OFF using the (
Position Sensor ON
and SIGNAL ON Screen
® ) will assure you the unit is in the
Position Sensor Screen
Position Sensor OFF
Screen
Position Sensor ON and
SIGNAL OFF Screen
20
) button.