Care And Maintenance - Omron HEM-670IT Instrustion Manual

Care and Maintenance

To keep your digital blood pressure monitor in the best condition and
protect the unit from damage, follow the directions listed below:
Keep the monitor in the storage case when not in use.
Do not fold the wrist cuff too tightly.
The fabric fastener could touch the inner surface of the cuff and damage it.
Clean the monitor with a soft dry cloth. Do not use any abrasive or
volatile cleaners. Do not attempt to clean the cuff.
CAUTION
Do not submerge the device or any of the components in water. Do
not subject the monitor to extreme hot or cold temperatures, humidity
or direct sunlight.
CAUTION
Store the device and the components in a clean, safe location.
CAUTION
Do not subject the monitor to strong shocks, such as dropping the unit
on the floor.
Remove the batteries if the unit will not be used for three months or
longer. Always replace all the batteries with new ones at the same time.
CAUTION
Use only Omron authorized parts and accessories. Parts and
accessories not approved for use with the device may damage the unit.
CAUTION
Changes or modification not approved by Omron Healthcare will void
the user warranty. Do not disassemble or attempt to repair the unit or
components.
CARE AND MAINTENANCE
68