Initial Setup For Telematrix 3000 Phone; Answering A Call On The Telematrix 3000 - Mitel 5212 User Reference Manual

78 Using the phone system

Initial setup for Telematrix 3000 phone

To set up your new phone service, follow these steps:
• Activate your phone. See "Activating a Telematrix 3000 phone" on page
78.
• Perform a Quick Set-up. See "Quick set-up" on page 95.
Activating a Telematrix 3000 phone
To activate a Telematrix 3000 phone you must physically connect the phone,
then log in with your extension and PIN number.
To activate your phone, follow these steps:
1
Unplug your computer from the network.
2 Plug the phone into the network (through the supplied power pack -
consult the documentation provided in the box).
3 Plug the computer into the phone.
4
Plug the phone power pack into an outlet.
5 Wait for the lights on the phone to stop flashing (this may take 30 seconds
or more):
6
Enter *00<your extension><your PIN>#. For example, if your extension
is 123 and your PIN is 9876, enter *001239876#
You have now successfully activated the phone, and can make calls.

Answering a call on the Telematrix 3000

When an incoming call is received on a phone, the phone rings, and a Line
Appearance flashes.
You can answer an incoming call by using the handset or the speakerphone.
See "Using the Telematrix 3000 handset" on page 78. See also, "Using the
Telematrix 3000 speakerphone" on page 79.
You can pull back a call that has been answered by a twinned target phone by
pressing the corresponding Line Appearance key. See "Twinned Calls on the
Telematrix 3000" on page 89.
Using the Telematrix 3000 handset
To answer your phone using the handset, follow these steps:
1
Lift the handset.
2 Alternatively, you may choose to use one of the following methods:
• Press the flashing Line Appearance key.
Final