Advertisement
Panel Response
Success: Operation is
successfully completed
Fail: Operation failed
No communication: Control
panel does not respond.
3.6 Retrieving and Displaying System Status
Status
Step
User Actions
Request
Request
1
Status
Look at
2
status
Arming Status
The system Arming Status is indicated via the respective
arming/disarming buttons' LED that light for several seconds. For
example, if the system is armed AWAY, the
the system is disarmed, the
If Partition is enabled, the arming Status of the first partition is
displayed concurrently with the corresponding first partition button
LED
then the second partition Status is displayed
,
concurrently with the second partition button LED
third partition Status is similarly displayed.
APPENDIX: SPECIFICATIONS
Frequency Band (MHz)
Communication Protocol
Battery type
Battery Life Expectancy
Operating Temperature
Dimensions (LxWxD)
Weight (including battery)
Color
Compliance with Standards
W.E.E.E. Product Recycling Declaration
For information regarding the recycling of this product you must contact the company from which you orignially purchased it. If you are discarding this product and not
returning it for repair then you must ensure that it is returned as identified by your supplier. This product is not to be thrown away with everyday waste.
Directive 2002/96/EC Waste Electrical and Electronic Equipment.
The technical documentation as required by the European Conformity Assessment procedure is kept at:
UNIT 6 MADINGLEY COURT CHIPPENHAM DRIVE KINGSTON MILTON KEYNES MK10 0BZ. Telephone number: 0870 7300800, Fax number: 0870 7300801
VISONIC LTD. (ISRAEL): P.O.B 22020 TEL-AVIV 61220 ISRAEL. PHONE: (972-3) 645-6789, FAX: (972-3) 645-6788
VISONIC INC. (U.S.A.): 65 WEST DUDLEY TOWN ROAD, BLOOMFIELD CT. 06002-1376. PHONE: (860) 243-0833, (800) 223-0020.
FAX: (860) 242-8094
VISONIC LTD. (UK): UNIT 6 MADINGLEY COURT CHIPPENHAM DRIVE KINGSTON MILTON KEYNES MK10 0BZ. TEL: (0870) 7300800
FAX: (0870) 7300801. TEL: (0870) 7300800 FAX: (0870) 7300801 PRODUCT SUPPORT: (0870) 7300830
VISONIC GmbH (D-A-CH): KIRCHFELDSTR. 118, D-40215 DÜSSELDORF, TEL.: +49 (0)211 600696-0, FAX: +49 (0)211 600696-19
VISONIC IBERICA: ISLA DE PALMA, 32 NAVE 7, POLÍGONO INDUSTRIAL NORTE, 28700 SAN SEBASTIÁN DE LOS REYES, (MADRID), ESPAÑA.
TEL (34) 91659-3120, FAX (34) 91663-8468. www.visonic-iberica.es
INTERNET: www.visonic.com
©VISONIC LTD. 2011
KP-140 PG2/KP-141 PG2
4
Buzzer Indication
Happy (success) beep
Sad (failure) beep
None
Keypad &
Panel
Response
The keypad's LED
blinks red once to
indicate
transmission of the
status request to the
control panel.
The panel's status is
indicated
on
keypad via the LED
/
/
and
the
Keys and Partition
Keys – see below
button will light and if
button will also light.
and then the
Europe: 433, 868, USA: 915
PowerG
3V, CR123A type.
Caution!
Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to
manufacturer's instructions.
4-5 years (for typical use).
0°C to 49°C (32°F to 120°F)
127x70x24mm (5 x 2-3/4 x 31/32 in)
107g (3.4 oz)
White
Europe: EN 300220-1, EN 50130-4, EN 50131-1 Grade 2 Class II, EN 50131-3, EN 301489.
USA: CFR 47 part 15, Canada RSS 210
D 303015 (Rev 2, 3/11)
LED Indication
Momentary GREEN
Momentary RED
None
Indication of Ready/Not Ready & Trouble Status
The Ready/Not Ready, Alarm Memory and Trouble indications are
provided via the keypad LED (see "M" in Figure 1) as follows:
LED
Indication
[1]
Green
Red
the
Arming
Yellow
Yellow
blinking
[1] The LED indication is displayed after the first red blink indicating
the status request.
[2] If there is more than one status indication, the LED will display
them consecutively.
[3] See respective sections in the control panel's User and Installer's
Guides.
Refer to separate Warranty statement
Problem Indication
If the panel is Not-Ready or if a Trouble or
Alarm Memory conditions exit, the Status
button (G in Fig.1) flashes for few seconds.
To identify the reason, press the button to
retrieve the Status indication - refer to section
3.6 for further information.
System
What it Means
Status [2]
System
You can arm the system
READY
System NOT-
One of the zones is not secured.
READY
You can not arm the system before
the zone is secured or bypassed. [3]
Trouble or
There was an alarm or there is
trouble situation that need to be
Alarm
reviewed and cleared. [3]
Memory
Keypad Low-
The battery of the keypad must be
Battery
replaced as shown in section 2.1.
D-303015
Advertisement
