Important Notice
RJ45 CONNECTION
When making
CAT5e /
RJ45
(below). Incorrect wiring can result in irreversible damage to the controller and MRA hub, this will invalidate the
warranty.
CAT5e cables are assembled according to the T568A standard. The T568A standard requires the cable end to
terminate the internal coloured wires in the order below, as viewed from the top
orange-white, blue, blue-white, orange, brown-white, brown.
A CAT5e tester must be used to test connections prior to connecting the system.
Note: Maximum cable run length from MRA4 hub to controller = 100m
Issue Date: May 2014
connections it is imperative that the termination is correctly wired to T-568A wiring standards
,
down
: green-white, green,
1 - MRA - User Manual REV_D E&OE
9