Audio Settings - Mercury Installation And User Manual

Screen 9

Audio Settings

Prese the Hamilton Logo from any
screne to enter the Settings for both
Audio and Lighting controlls.
The Audio Settings will appear first.
This alows you to fine tune your
system: Redefine
Zones
Reduce the maximum volume
Set sourse type
Rename sourses
Rename zone areas
Editing any of these setting will prompt the
keyboard to appear.
Turn Party Mode on/off
Party Mode allows you play the same
music across all the whole system and
by selecting additional zones without
having to turn to each control plate in
each zone individually.
Screen 10
Keyboard Screen
The keyboard screen will apear for you
to type in Source and Zone names to
help personallise your system and
make it easier to use.
Press the arrow to go back or entre
text and press the tick box to confirm
the change.
Screen 11
Keypad Screen
If you press on the
screen will appear to prompt you to
input a number between 1 and 4. This
will allow you to turn on individual
zones from the touch screen.
Issued Date: June 2014
icon the Keypad
i - MRA - User Manual Rev E
24