Table of Contents
Advertisement
Mercury Audio - Dock Assistant Set-up
The Mercury Dock Assistant App allows you to link an Apple iOS device to the system, to access your
iTunes library and Spotify account to listen to your music throughout your home. This setup
shows you how to link an iPhone / iPod Touch to be used as a media interface. This additional set up should
be done once your system is installed.
Before you start:
1.
Connect the Mercury Audio System to your router through its IP port using CAT5 cable.
Connect the Dock's Audio and Data ports to the Mercury Audio System using CAT5 cable.
2.
Download the Dock Assistant App from the App Store onto the Apple iOS device you wish to act
3.
as your media interface.
Step 1
Launch the Dock Assistant
App on your phone, or the
device you wish to dock.
Select
the Mercury
Dock
Assistant App icon shown in
the diagram on the right.
Once loaded, the App will
display
'Not Docked'.
Step 2
Connect the iOS device to
the Dock using a USB lead.
The
App
will
display
screen similar to the one on
the right.
This screen will show your
Spotify status and if you are
logged in to Spotify
The Dock Assistant is now set-up and ready to
Issued Date: June 2014
a
use
!
i – MRA – User Manual REV_E E&OE
27
Hide quick links:
Advertisement
Table of Contents
