REMOVAL OF GLASS PLATE
Should it be neccssary that you need to remove the glass cover plate, you will note a small cut away at the bottom
of the chrome frame gently slide a small plastic tipped screwdriver under the glass and ease the glass off the frame. If
using a metal screwdriver to do this be careful not to scratch the underside of the glass.
Issue Date: May 2014
8. Insert CAT5e cable until it clicks. (Refer to
for zone setting).
9. Carefully push control plate into frame and
mounting bracket for a firm fit.
page
19
1 - MRA - User Manual REV_D E&OE
17