Mercury Installation And User Manual page 16

INSTALLATION
The CPT4+4 installs into a standard UK single gang 35mm metal or dry lining wall box. For best installation have the
CAT5e cable enter from above the back box. Terminate the CAT5e cable with the appropriate RJ45 for the cable
type to T568A straight through wiring standard.
Issue Date: May 2014
1. Pull CAT5e cable through plastic wall mount.
2. Using supplied 35mm screws. Fix in wall mount to
back box. Do not over tighten and ensure moulding is
level.
3. Remove Linea frame from packaging.
4. Pull CAT5e cable through Linea frame. Push on Linea
frame around plastic mounting bracket ensuring cut out
is at the bottom.
Ensure notch is at the bottom of frame. This is used
when removing the control plate
7. Remove Control Front Plate from packaging
1 - MRA - User Manual REV_D E&OE
16