Setup items by operation
1.40
Performing IP address filtering
Specify settings for performing IP address filtering.
Performing IP address filtering limits access from specified IP addresses. Specify addresses from which this
machine is accessible and inaccessible.
Specify the settings according to the following flowchart.
1.40.1
TCP/IP Settings
Specify settings to use this machine in a TCP/IP network environment.
For details, refer to
1.40.2
IP Filtering
In Administrator mode of Web Connection, select the Network tab - "TCP/IP Setting" - "IP Filtering".
Specify the following settings.
Item
Permit Access
Set 1 to 5
Deny Access
Set 1 to 5
Océ cm3522/cm2522
TCP/IP Settings
IP Filtering
Finish
"Specifying general settings for TCP/IP-based communication" on page
Definition
To specify permitted addresses, select "Enable".
Specify permitted addresses. (Format: "***.***.***.***", Range
for ***: 0 to 255)
To specify denied addresses, select "Enable".
Specify denied addresses. (Format: "***.***.***.***", Range for
***: 0 to 255)
1
1-2.
Prior confirmation
Permitted addresses
Denied addresses
1-119