Authentication Method Setting
This specifies the authentication method to use by the User Authentication function.
Note:
Before performing this setup, you first need to set "75 User Authentication" (see page 14).
Press the Function key.
Select "General Settings".
Select "09 Key Operator Mode".
Enter the Key Operator's password (8-digit),
and then select "OK".
Note:
The default password is "00000000".
To change the password, select "85 Key Operator
Password" in the General Settings (Key Operator
Mode), and then enter the new password.
Select "60 - 79" tab, and scroll the screen, and
then select "74 Authentication Method".
�
Select the authentication method, and then
select "OK" .
NTLM
Selects NTLM.
Clr Text
Selects CLEAR TEXT.
Press the Reset key to return
to standby.
�
�
23