Table of Contents
Advertisement
Operations Common to Each Mode
"MOde
Number of titles
CO
mode
50 titles
Nmode
20 titles
R;dio mode
30 titles
-
Entering titles
Titles up to 10 characters long can be stored in
memory and displayed for CD, CD changer,
Radio stations and TV stations. The number of
titles that can be entered for each mode are as
follows.
Clearing titles
1. Select and playa CD in the CD changer or
tune in to a TV station or Radio for which you
want to clear the title.
2. Press and hold the [DISP] button for 1
second or longer.
3.
Press the
[~]
or
[~~]
button to select
"TITLE INPUT".
4.
Press the
[:-~~]
button.
The display switches to the title input display.
5.
Press and hold the [BND] button for
1
second or longer.
All characters in the title disappear.
6.
Press and hold the
[~N~]
button for
2
seconds
or longer to store the setting.
AUX function
This system has an external input jack on the
front panel so you can listen to sounds and
music from external devices connected to this
unit.
• Selecting AUX IN sensitivity
Make the following settings to select the
sensitivity when sounds from external devices
connected to this unit are difficult to hear even
after adjusting the volume.
*
The factory default setting is
"MID".
1.
Press and hold the [DISP] button for
1
second or longer.
2. Select "AUX SENS".
3.
Press the [. .] or
[T]
button to select
"HIGH", "MID" or "LOW".
100 titles
Number of titles
DCZ625 connected
CD changer mode
1. Press the [SRC] button to select the mode
you want to enter a title (Radio, CD, CD
changer or TV).
2. Select and playa CD in the CD changer or
tune in to a TV station or Radio for which you
want to enter the title.
3. Press and hold the [DISP] button for 1
second or longer.
4.
Press the
[~
... ] or
[~]
button to select
"TITLE INPUT".
5.
Press the
[:-~~]
button.
The display switches to the title input display.
6.
Press the
[~]
or
[~]
button to move the
cursor.
7.
Press the [BND] button to select a character
type. Each time you press the [BND] button,
the character type changes in the following
order:
Capital letters
~
Numbers
~
Symbols
~
Capital letters ...
8. Press the [. .] or
[T]
button to select the
desired character.
9. Repeat steps 6 to 8 to enter up to 10
characters for the title.
10. Press and hold the
[:-~~
] button for 2 seconds
or longer to store the title into memory.
DXZ475MP
21
Advertisement
Table of Contents
