Table of Contents
Advertisement
Basic Operations
Sound Adjustment
You can adjust a sound effect or tone quality to
your preference.
To change sound setting
1. Press the
[..1']
button to switch to the
sound adjustment selection display.
*
The factory default sound setting is "Z-
EHCR".
2. Then press the
[~]
or
[~]
button to
select the sound adjustment mode.
Each time you press the
[~]
or
[~]
button, the sound adjustment mode
changes as following order:
"Z-EHCR"
+--+
"BASS"
+--+
"TREBLE"
+--+
"BALANCE"
+--+
"FADER"
+--+
"REAR/S-W"
+--+
"S-W VOL"
+--+
"HPF"
3. Press the [.] or
[T]
button to adjust the
selected audio mode.
*
In the case of display blinking "ENT", you
can press the
[~J~
]
button to adjust the
-
setting value.
4. After completing settings, press the
[..I']
button to return to the previous mode.
• Setting the Z-Enhancer
This unit are provided with 3 types of sound
tone effects stored in memory.
Select the one you prefer.
*
The factory default setting is "OFF".
2-1. Select "Z-EHCR".
3-1. Each time you press the [.] or
[T]
button, the tone effect changes in the
following order:
"EXCITE"
+--+
"IMPACT"
+--+
"B-B09ST"
+--+
"OFF"
EXCITE
: bass and treble emphasized
mid deemphasized
IMPACT
: bass and treble emphasized
B-BOOST : bass emphasized
OFF
: no sound effect
When "EXCITE" is set:
3-2. Press the
[~J~]
button.
3-3. Press the [.] or
[T]
button to adjust the
bass and treble in the range of
+3
to
-3.
*
The factory default setting is "0".
3-4. Press the
[~J~]
button to -return to previous
mode.
When "IMPACT" is set:
3-2. Press the
[~J~]
button.
3-3. Press the [.] or
[T]
button to adjust the
bass and treble in the range of
+3
to
-3.
*
The factory default setting is "0".
3-4. Press the
[~J~]
button to return to previous
mode.
When "B-BOOST" is set:
3-2.' Press the
[~J~]
button.
3-3.
Press the [.] or
[T]
button to adjust the
bass in the range of
+3
to
-3.
*
The factory default setting is "0".
3-4. Press the
[~J~]
button to return to previous
mode.
• Adjusting the bass
_
This adjustment can be performed only when
the Z-Enhancer is set to "OFF".
2-1. Select "BASS".
3-1. Press the [.] or
[T]
button to adjust the
bass.
*
The factory default setting is "0".
(Adjustment range: +8 to -8)
• Adjusting the treble
This adjustment can be performed only when
the Z-Enhancer is set to "OFF".
2-1. Select "TREBLE".
3-1. Press the [.] or
[T]
button to adjust the
treble.
*
The factory default setting is "0".
(Adjustment range:
+7
to
-7)
• Adjusting the balance
2-1. Select "BALANCE".
3-1. Press the [.] or
[T]
button to adjust the
balance of the right and left speakers.
*
The factory default setting is "CENTE R"
(center). (Adjustment range: RIGHT12 to
LEFT12 (right 12 to left 12))
DXZ475MP
11
Advertisement
Table of Contents
