How To Use The Product (By Mode); Automatic Mode - CeraGem CGM MB-1101 User Manual

* The duration of operation modes can vary depending on the body type of the user.

3. How to use the product (by mode)

Automatic Mode

The automatic mode allows one to use the product's body recognition, massage, thermal
acupressure, and Ceragem Sound features without additional operation.
(Mode Duration: Approx. 36 minutes 30 seconds)
1. Turn on the remote control power supply and check the display.
- External projectors appear only when they are connected.
- The current strength and temperature are displayed.
2. Pressing the automatic mode key twice (once during the Manual mode)
causes the Ceragem Sound to be played and body sensing to begin at the
sound of the buzzer. Please lie down with correct body posture.
3. Once body sensing is completed, the mode is automatically
executed. Assume correct body posture.
- The operating time is displayed on top of the body icon.
- A buzzer will sound when in Abdomen Mode.
Assume proper posture for abdominal massage and stimulation.
- Once the mode is complete, the buzzer will sound, and the remote control will
turn off.
- Refer to pages 21-23 for information on strength, temperature, and sound settings.
- In Abdomen Mode, the user assumes a proper position to ensure
satisfactory massaging and thermal stimulation on the abdomen.
- Pressing the key once causes the current active mode to
blink for 3 seconds. Pressing it again within 3 seconds
changes the mode.
- If in Manual Mode, please note that the mode will be
changed immediately without blinking.
- The display showing operating time blinks while the
internal projector moving to the head's position before
body recognition.
25