Important safety issues This appliance is not intended for use by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. The information below stands to protect the safety of the user and to prevent any property damage.
Page 3
Important safety issues Important safety issues - Do not use the unit after drinking alcohol. - Do not allow pets to play on or around the unit, especially during operation. - Circulatory insuffiency or weak circulation in legs or heart diseases. - Pain without cause defined.
Page 4
C o n t e n t s Ground connection method This product must be connected to a ground connection. The ground connection reduces resistance against electric currents in case there are any defects or breakdowns which may lead to electric shocks and damage. On the product, >>...
Page 5
MEMO of the product 1. Product’s characteristics 2. The name of each part...
(Applied part) SD CARD Internal Projector 5. Indications for Use: The intended use of the Ceragem® Thermal Massager Model CGM MB-1101 Automatic Earphone cord External projector Thermal Massager is to provide muscle relaxation therapy by delivering heat and soothing connector massage.
Page 7
MEMO and preparation Check product’s composition Check before product installation Installation Check after installation...
Page 8
SD card Users may add their preferred music in addition to the 6. Do not use damaged power cords, plugs or old sockets. Ceragem default sound. Outer fabric Protects against product contamination and burns; this detachable fabric makes washing easy.
3. Installation 3. Installation Please connect the Remote Control, External Projectors and cable properly. Take out the product and its components from the box. (Before connecting the power cord, connect the remote control first.) accessories Assemble the remote control cradle onto the frame and place the remote control onto the cradle.
Page 10
product 1. Remote control layout / Back label 2. How to use the remote control 3. How to use the product (by mode) 4. How to move the product 1. Before connecting the power cord, connect the remote control first. 2.
1. Remote Control layout / Back label 2. How to use the remote control Remote control button layout/Back label Screen layout Power button Mode 2 button Mode 1 button Up/Down button Strength button When the mode is in operation, the time icon is turned on, displaying the operating time by having the blank disappeared one by one.
2. How to use the remote control 2. How to use the remote control Turning on the remote control Adjusting Strength Remote control must be held in the hand of the person using the device so that the The strength of the internal projectors can be adjusted before or during use. On/Off button can be accessed easily.
Up/Down key. Music Selection Volume Internal External Main Heating Auxiliary Heating Projector Projector Element Element(see p.9) Start/Pause Ceragem Sound : 1~10 0~10 User Sound : 11~100 Check the condition of the changed sound on the remote control display.
2. How to use the remote control 3. How to use the product (by mode) Automatic Mode When the auxiliary part is closed When the auxiliary part is closed the external heating element and the Thermal feature can be used. - External projectors appear only when they are connected.
Page 15
3. How to use the product (by mode) 3. How to use the product (by mode) Press twice to select Mode 1 Press twice to select Mode 2 Long-press. (Select modes 3~9 in sequence.) Mode 1 Mode 2 Mode 3 Mode 4 Mode 5 Mode 6...
Page 16
3. How to use the product (by mode) 3. How to use the product (by mode) Ceramic moving pattern by mode Thermal massage (88 seconds) Automatic Mode Mode 1 Thermal massage (100 seconds) 10 seconds 10 seconds Standby Standby 60 seconds Standby 2 minutes Standby (Abdomen switch) (Abdomen switch)
Page 17
The massage patterns may be adjusted depending on the user's height. The massage patterns may be adjusted depending on the user's height. 3. How to use the product (by mode) 3. How to use the product (by mode) Ceramic moving pattern by mode Ceramic moving pattern by mode Thermal massage (88 seconds) Thermal massage (88 seconds)
Page 18
4. How to move the product Disconnect the power cord, remote control, and external projector from the main body. Then, lift the head cushion and close the supporting mat. (To open the supporting mat, pull forward and then lower it.) <Close>...
Page 19
Inspection points before use 1. Leather is an oil based product. Therefore it is crucial that it is not exposed to organic solvents such as acetone, ballpoint pen ink, gasoline, thinners, sweat, mousse, spray, and etc. 2. Where there is direct contact with the head or skin, wipe with a dry cloth. 3.
Page 20
In case of error during operation, the following messages appear on the remote Does the remote control turn on? control display: Symbol Symbol Error location Q: Is the power switch (located at the side of the product) turned on? A: Turn on the power switch. External Projector Internal Projector Q: Is the power cord connected properly?
Any other letters of warranty that have not been issued by Ceragem, letters that have been additionally issued by others, or letters that have passed the expiry date are exempt from the terms stated above.
Depending on the mode of operation Continuous operation. intended for use in the electromagnetic environment specified below.The customer or the user of CGM MB-1101 should assure that it is used in such an (Automatic Thermal Massager) environment WITH RESPECT TO ELECTRIC SHOCK FIRE, AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH UL60601-1/CAN/CSA C22.2 No.
The CGM MB-1101 is intended for use in the electromagnetic environment below. specified below. The customer or the user of CGM MB-1101 should assure CGM MB-1101 The customer or the user of the should assure that it is used in such an environment that it is used is such an environment.
Page 25
CGM MB-1101. Equipment and the CGM MB-1101 The CERAGEM-CH is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The user of the CERAGEM-CH can help CGM MB-1101 prevent electromagnetic interference by maintaining a minimum distance between...
Need help?
Do you have a question about the CGM MB-1101 and is the answer not in the manual?
Questions and answers