Clip Metadata - Panasonic AVCCAM AG-HMC151E Operating Instructions Manual

Clip metadata

You can add the video and audio systems, name
of the videographer, shooting location, text memos
and other information to the video data you have
recorded on the SD Memory Card. This data is
called the clip metadata.
(Display method: Page 68)
There are two kinds of clip metadata: the data that
is recorded automatically during shooting, and the
data in the metadata upload file created on the SD
Memory Card which is loaded in the unit.
(Loading method: Next page)
What the clip metadata consists of
You can set the items underlined below by loading
the metadata upload file on the SD Memory
Card. All other items are set automatically during
shooting.
GLOBAL CLIP ID:
This indicates the global clip ID that shows the
shooting status of the clip.
USER CLIP NAME:
This indicates the name of the clip that the user
has set. ∗
1
VIDEO & AUDIO:
This indicates the recorded image's FRAME
RATE, RESOLUTION, PULL DOWN system and
AUDIO.
ACCESS:
This indicates the CREATOR (name of the
person recording), CREATION DATE (recording
date), LAST UPDATE DATE (date on which
the data was last updated) and LAST UPDATE
PERSON (the person who last updated the
data).
DEVICE:
This indicates the MANUFACTURER
(manufacturer of the equipment), SERIAL NO.
(serial number of the equipment) and MODEL
NAME (equipment model name: AG-HMC150).
SHOOT:
This indicates the SHOOTER (name of the
videographer) and the PLACE NAME (name of
location).
LOCATION:
This indicates ALTITUDE, LONGITUDE,
LATITUDE, and SOURCE (altitude, longitude,
latitude, information source).
SCENARIO: ∗
2
This indicates the PROGRAM NAME, SCENE
NO. and TAKE NO.
NEWS 1:
This indicates the REPORTER (name of the
reporter) and PURPOSE (purpose of data
collection).
NEWS 2:
This indicates the OBJECT (target of data
collection).
MEMO: ∗
3
This indicates the PERSON (name of the
person who recorded the text memo) and TEXT
(contents of memo).
∗
If there is no information in the metadata upload
1
file, consecutive five-digit numbers will be
applied to the clips in the order that they were
recorded, with the first clip to be recorded being
given the number 0. The USER CLIP NAME
recording method is selectable. Please refer to
the page 54.
∗
When SCENARIO is to be input, you must input
2
the PROGRAM NAME. You cannot input the
SCENE NO. and TAKE NO. only.
∗
When MEMO is to be input, you must input
3
TEXT. You cannot input PERSON only.
• Only printable ASCII characters can be
displayed by this unit.
• Due to the limitations imposed by this unit
on the number of characters which can be
displayed, not all the data can be displayed.
(This does not mean that the data which is not
displayed has been deleted.) Use an AVCCAM
viewer or other program to check all the data.
• Metadata can be produced with AVCCAM
Viewer.
53