Panasonic AVCCAM AG-HMC151E Operating Instructions Manual page 57

4
When the screen below appears, set the
time code value.
Tilt the Operation lever in the
and select time code value.
Tilt in the direction to move to the next digit,
and tilt in the directions again to select
value.
You can reset the time code to zero by pressing
RESET/TC SET button.
BARS SHUTTER
CH1 SELECT CH2 SELECT
INT(L) INT(R)
INPUT1 INPUT2
INPUT2
COUNTER RESET/TC SET
LCD
Camera
5
Push the Operation lever when you have
finished setting the time code.
6
Tilt the Operation lever in the
move to YES, and push the Operation lever.
directions
SPEED SELECT
INPUT 1 INPUT 2
ON ON
OFF OFF
MIC POWER +48V
AUDIO
ZEBRA OIS
EVF DTL WFM
direction to
With this unit, the time code value is adjusted in
accordance with the format and frame rate. For
this reason, bear in mind that making a change in
the format or frame rate may result in discontinuity
from the last time code value of the previous
recording. (Only when SYSTEM FREQ is set to
59.9 Hz)
Recording format
1080/24P
720/24P
Time code
adjustment
Adjustable in
4-frame increments
57