Adjusting The Gain; Light Intensity Adjustments; Adjusting The White Balance - Panasonic AVCCAM AG-HMC151E Operating Instructions Manual

Memory card camera-recorder
Hide thumbs Also See for AVCCAM AG-HMC151E:
Table of Contents

Advertisement

Shooting in manual mode (continued)

Adjusting the gain

When the display is dark, increase the gain to
brighten the display.
GAIN switch
1
Use the AUTO/MANUAL switch to set to
manual mode. (Page 36)
2
Switch the gain with the GAIN switch.
L:
Set here under normal conditions. (0 dB)
M:
Increase the gain of the image amplifier.
(The default value is 6 dB.)
H:
Increase the gain of the image amplifier.
(The default value is 12 dB.)
You can change the M and H gain values
using the MID GAIN and HIGH GAIN items on
the setting menu SW MODE screen.
(Page 88)
If the AGC item on the settings menu AUTO
SW screen is set to anything other than OFF,
the gain setting will be set to automatic during
automatic mode, regardless of the position of
the GAIN switch. (Page 90)
When a slow shutter speed (1/12 ∗ ) has been
set, the gain is fixed at 0 dB regardless of the
GAIN switch setting. (Page 46)
∗ 1/15 when SYSTEM FREQ is set to 59.9 Hz
38

Light intensity adjustments

Use the ND FILTER switch to change the ND Filter
used (filter to change light intensity).
OFF:
ND filter is not used.
1/4:
Cuts light intensity by up to about 1/4.
1/16:
Cuts light intensity by up to about 1/16.
1/64:
Cuts light intensity by up to about 1/64.
ND FILTER switch

Adjusting the white balance

In order to reproduce the white accurately, adjust
the ratio between the three RGB primary colors. If
the white balance is not adjusted properly, not only
will the white be reproduced poorly but the color
tones of the entire screen will also be downgraded.
When you are shooting in manual mode, readjust
the white balance whenever lighting conditions
change.
You can save adjustments and reselect them by
setting the WHITE BAL switch to A or B.
You can also use the preset values.
Use the settings to suit the shooting conditions.
AWB button
WHITE BAL switch

Advertisement

Table of Contents
loading

Table of Contents