Clip Metadata - Panasonic AG-HVX202AEN Operating Instructions Manual

Clip metadata

You can add the video and audio systems, name
of the videographer, shooting location, text memos
and other information to the video data you have
recorded on the P2 card. This data is called the clip
metadata. (Display method: Page 70)
There are two kinds of clip metadata: the data that
is recorded automatically during shooting, and the
data in the metadata upload file created on the SD
memory card which is loaded in the unit. (Loading
method: Page 72)
Creating the metadata upload file on the SD
memory card
You will need the latest updated version of P2
Viewer. Download it from the URL address given
below, and install it in the computer.
https://eww.pavc.panasonic.co.jp/pro-av/
What the clip metadata consists of
You can set the items underlined below by loading
the metadata upload file on the SD memory card. All
other items are set automatically during shooting.
GLOBAL CLIP ID:
This indicates the global clip ID that shows the
shooting status of the clip.
USER CLIP NAME :
This indicates the name of the clip that the user
1
has set.
VIDEO:
This indicates the recorded image’' s FRAME
RATE, PULL DOWN system and ASPECT
RATIO.
AUDIO:
This indicates the recorded sound’' s SAMPLING
RATE (sampling frequency) and BITS PER
SAMPLE (number of quantizing bits).
ACCESS:
This indicates the CREATOR (name of the
person recording), CREATION DATE (recording
date), LAST UPDATE PERSON (the person who
last updated the data) and LAST UPDATE DATE
(date on which the data was last updated).
DEVICE:
This indicates the MANUFACTURER
(manufacturer of the equipment), SERIAL NO.
(serial number of the equipment) and MODEL
NAME (equipment model name).
<Note>
The series name of the unit, “"AG-HVX202”",
appears for the MODEL NAME.
SHOOT:
This indicates the SHOOTER (name of the
videographer), START DATE (date and time at
which shooting started), END DATE (date and
time at which shooting ended) and LOCATION/
ALTITUDE/LONGITUDE/LATITUDE/SOURCE/
PLACE NAME (shooting location, altitude,
longitude, latitude, information source, name of
location).
SCENARIO: 2
This indicates the PROGRAM NAME, SCENE
NO. and TAKE NO.
NEWS:
This indicates the REPORTER (name of the
reporter), PURPOSE (purpose of data collection)
and OBJECT (target of data collection).
MEMO : 3
This indicates the No. (memo No.), OFFSET
(frame position from the beginning of the clip),
PERSON (name of the person who recorded the
text memo), and TEXT (contents of memo).
1 If there is no information in the metadata upload
file, the global clip ID serves as the USER
CLIP NAME. The USER CLIP NAME recording
method is selectable. Please refer to Appendix
(page 132).
2 When SCENARIO is to be input, you must input
the PROGRAM NAME. You cannot input the
SCENE NO. and TAKE NO. only.
3 When MEMO is to be input, you must input
TEXT. You cannot input PERSON only.
•• It may not be possible to load files which have
been edited using a viewer other than the P2
Viewer. (In this case, UNKNOWN DATA will be
displayed.)
•• Only printable ASCII characters can be displayed
by this unit.
•• Due to the limitations imposed by this unit on the
number of characters which can be displayed,
not all the data can be displayed. (This does not
mean that the data which is not displayed has
been deleted.) Use a P2 viewer or other program
to check all the data.
P2
57