Setup Menu List; Scene File Screen - Panasonic AVCCAM AG-HMC151E Operating Instructions Manual

Setup menu list

When the settings are changed using the SYSTEM FREQ item (Page 99) on the OTHER FUNCTIONS
screen, whatever has been set for SYNCRO SCAN (See below), REC FORMAT (Page 91), HDMI OUT
SEL, and CMPNT OUT SEL (Page 93) will be changed to the initial setting.

SCENE FILE screen

Item
CARD READ/ (Camera)
WRITE
LOAD/SAVE/ (Camera)
INIT
SYNCRO (Camera)
SCAN
DETAIL LEVEL (Camera)
V DETAIL (Camera)
LEVEL
DETAIL (Camera)
CORING
CHROMA (Camera)
LEVEL
CHROMA (Camera)
PHASE
COLOR TEMP (Camera)
Ach
COLOR TEMP (Camera)
Bch
MASTER PED (Camera)
A.IRIS LEVEL (Camera)
86
Display
mode
Reads and writes scene files on the SD Memory Card.
READ: Reads scene files (all scenes, F1 to F6) saved on the SD Memory Card
after setting values are selected.
WRITE: Saves current scene file setting values (for all scenes, F1 to F6) on the
SD Memory Card.
NO: Returns to the last screen.
LOAD: Loads the scene file settings which is saved by this camera.
SAVE: Saves the changed scene file settings.
INITIALIZE: The settings of the scene file selected with the SCENE FILE dial
NO: Returns to the last screen.
Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
Holding the Operation lever toward the
a faster rate.
When SYSTEM FREQ is set to 50 Hz
• 50P/50i:
1/50.0 ... 1/248.9
(Factory default setting is 1/48.0.)
• 25P:
1/25.0 ... 1/48.0 ... 1/248.9
Adjusts the level of the image outline correction (in the horizontal and vertical
directions).
- 7...0...+ 7
Adjusts the level of outline correction in the vertical direction.
- 7...0...+ 7
Adjusts the level of noise reduction of the detail signal.
- 7...0...+ 7
Set to – for a clearer image. Noise increases slightly.
Set to + to reduce noise.
Adjusts the chroma level.
- 7...0...+ 7
Makes fine adjustments to the chroma phase.
- 7...0...+ 7
Makes fine adjustments to the color temperature (after white balance Ach
adjustment).
- 7...0...+ 7
Makes fine adjustments to the color temperature (after white balance Bch
adjustment).
- 7...0...+ 7
Adjusts the master pedestal (black level of the image) as the basis for images.
- 100...0...+ 100
Sets the desired AUTO IRIS level.
- 10...0...+ 10
Description of settings
are returned to the factory settings.
or will cause the values to change at
When SYSTEM FREQ is set to 59.9 Hz
• 60P/60i:
1/60.0...1/249.8
(Factory default setting is 1/48.0.)
• 30P:
1/30.0...1/48.0...1/249.8
• 24P:
1/24.0...1/48.0...1/249.8
indicates the factory setting.