Display Setup Screen - Panasonic AVCCAM AG-HMC151E Operating Instructions Manual

Setup menu list (continued)

DISPLAY SETUP screen

Item
ZEBRA (Camera)
DETECT1
ZEBRA (Camera)
DETECT2
MARKER (Camera)
SAFETY ZONE (Camera)
REC COUNTER (Camera)
VIDEO OUT (Camera)
OSD (PB)
DATE/TIME (Camera)
(PB)
LEVEL METER (Camera)
(PB)
ZOOM & (Camera)
FOCUS
CARD & (Camera)
BATTERY (PB)
OTHER (Camera)
DISPLAY (PB)
LCD (Camera)
BACKLIGHT (PB)
LCD SET (Camera)
(PB)
EVF SET (Camera)
(PB)
94
Display
mode
Selects the brightness level of the left-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%
Selects the brightness level of the right-leaning zebra patterns on the screen.
50%, 55%, 60%, 65%, 70%, 75%, 80%, 85%, 90%, 95%, 100%, 105%, OFF
• The zebra patterns do not appear if you select OFF.
Select ON to display the marker. (Page 42)
ON OFF
To display the marker, press the ZEBRA button.
Sets SAFETY ZONE. (Page 78)
90%, 4:3, OFF
Selects counter operation during recording.
TOTAL: The count continues to increase until the RESET/TC SET button is
pressed to reset it.
CLIP: Resets the counter at start of recording and counts the time of each
recording session.
• In PB mode, operation is always in CLIP mode.
Select ON to output the information displayed on the screen together with the
signals from the VIDEO OUT jack.
ON OFF
Sets whether to display the date and time on the screen and whether to output
from the VIDEO OUT jack.
TIME: The time is displayed.
DATE: The date is displayed.
TIME & DATE: The date and time are displayed.
OFF: The date and time are not displayed.
Select ON to display the audio level meter.
ON OFF
Selects the unit of zoom and focus values.
OFF, NUMBER, mm/feet, mm/m
• Use the mm/feet or mm/m display only as a general guideline since it is not
entirely accurate.
Select ON to display the remaining SD Memory Card recording capacity and
remaining battery charge.
ON OFF
Select how much information to display on the viewfinder and the LCD monitor.
(Page 81)
PARTIAL, ALL, OFF
Adjusts the backlight of the LCD monitor. Select HIGH for brighter backlight.
LOW, NORMAL, HIGH
Adjusts the display level of the images on the LCD monitor. (Page 26)
LCD COLOR LEVEL
LCD BRIGHTNESS
LCD CONTRAST
Adjusts the display level of the images on the viewfinder. (Page 26)
EVF COLOR LEVEL
EVF BRIGHTNESS
EVF CONTRAST
Description of settings
indicates the factory setting.