Table of Contents
Advertisement
4
C H A P T E R
Powering On and Configuring the System
Power
Powering On and Configuring the Appliance
This section provides instructions for configuring the primary network interface using the
preinstalled Sun ZFS Storage 7000 command line interface (CLI). After you configure the
primary interface, configure the remaining system parameters using the browser user interface
(BUI) from any client on the same network.
Prerequisites
Refer to the
Complete the system cabling according to the
Gather the following information in preparation for configuring an Ethernet interface on the
storage controller.
IP address
■
IP netmask
■
Host name
■
Domain Name Server (DNS) domain name
■
DNS server IP address
■
Default router IP address
■
Password
■
If you will access the appliance through an administrative client, configure the administrative
client with the following settings:
8N1: eight data bits, no parity, one stop bit
■
9600 baud
■
Disable hardware flow control (CTS/RTS)
■
4
Installation
section for detailed instructions to install your system in the rack.
Cabling Diagrams
section.
141
Advertisement
Table of Contents
